EN
UA EN
Guarantee: 12 months
  • Control manual
  • Center open
  • Flow 70 l/min
  • Nominal inlet pressure 200 bar
  • Maximum pressure at ports A and B 250 bar
  • Number of sections 1 ... 10 pcs
Description

Its simple, cost-optimized design makes this control valve an excellent choice for basic hydraulic systems of mobile machinery and equipment.

Applications:

  • tractors;
  • municipal machinery;
  • motor graders.

According to the applicable technical specifications (TU), Hydrosila products are not classified as dual-use products.

Features:

  • the MRS70 hydraulic control valve is designed for hydraulic systems with flow rates up to 70 l/min;
  • sectional design allows easy adaptation to different applications;
  • open-center design for hydraulic systems with a fixed-displacement pump;
  • equipped with a main relief valve and a check valve in each working section;
  • parallel internal flow distribution;
  • 3- and 4-position spools;
  • manual spool control;
  • power-beyond (“carry-over”) port available as an option.

MRS70.4 design versions:

  • MRS70.4/1 — for stand-alone use in hydraulic systems;
  • MRS70.4/2 — for use in combination with the 820-4634010 control valve.

Hydraulic fluids: mineral and special hydraulic oils with a kinematic viscosity of 30–70 mm²/s at +50 °C.

The fluids must comply with DIN 51524-2.

Technical Specifications

Technical Specifications of MPC70.4 series Hydraulic Control Valves

Тип гідророзподільника
Control valve type
Секційний, із закритим
центром
Sectional, open-center
Умовний прохід / Rated bore mm 12
Витрата робочої рідини (номінальна) / Flow (rated) l/min 70
Витрата робочої рідини (максимальна) / Flow (maximum) l/min 90
Робочий тиск (номінальний) / Pressure (rated) bar 20
Робочий тиск (максимальний) / Pressure (maximum) bar 25
Кількість секцій / Number of sections   1÷10
Керування золотником / Spool actuation type   Важільне / Lever
Вага / Weight kg 3,3 × N + 4,1
Viewed products