Group 1

Displacement: 1 ... 10 cm³/rev
Rated pressure: up to 250 bar

KVANT Group 1 gear pumps GP1K1...GP1K10 are available with a wide range of drive shafts, mounting flanges and port connection options in accordance with commonly used international standards. Their compact design and variety of configurations make them a convenient solution for hydraulic power units and mini power packs.

KVANT Group 1 pumps are available in right-hand and left-hand rotation versions.

Навивальні рукави високого тиску мають чотири спіральних навивки, відповідають стандарту EN 856 4SP для гідросистем з номінальним тиском до 380 бар.

Універсальний РВТ для гідросистем високого тиску. Великий ресурс роботи роблять цей рукав відмінним вибором для широкого спектра мобільних машин.

Displacement: 25, 32, 50 cm³/rev

Gear pumps for hydraulic systems with rated pressure up to 16 bar.

Low-pressure gear pumps are used in transmission lubrication systems of tractors and other mobile machinery.

Spare parts for Danfoss (Sauer)® Series 90 axial piston pumps and hydraulic motors.

Cylinder blocks: 8100974, 8200570, 519259.

Pistons with slippers: 708230, 364000, 727750.

Drive shafts: 104204, 104206, 104504, 104512, 104584, 104586, 104860, 104897, 105050, 105051, 105054, 105055, 105064, 105065, 105068, 105069, 105074, 105075, 113337.

Hydrosila designations:

Cylinder blocks: HS90.75-01.200, HS90.100-01.200, HS90.130-01.200.

Pistons with slippers: HS90.75-01.100, HS90.100-01.100, HS90.130-01.110.

Drive shafts: HS90.55-11012275, HS90.55-11014512, HS90.55-8000112, HS90.75-11012424, HS90.75-8100264, HS90.75-8100266, HS90.100-11012429, HS90.100-11014553, HS90.100-8200170, HS90.100-8200171, HS90.130-335695, HS90.180-11004306.

Spare parts for EATON® Series 1 pumps and hydraulic motors.

Cylinder blocks: 990413, 990414, 990415. Valve plates: 104189, 104203, 104856, 105186, 105100, 105101, 105102, 105103, 105104, 105095, 105096, 105097, 105098, 105099. Bearing plates: 104198, 103852, 103814. Piston assemblies: 104199, 101077, 103818. Slipper retainers: 104211, 103853, 103817. Shafts: 104204, 104206, 104504, 104512, 104584, 104586, 104860, 104897, 105050, 105051, 105054, 105055, 105064, 105065, 105068, 105069, 105074, 105075, 113337.

Hydrosila designations

Cylinder blocks: HS46-990413, HS54-990414, HS64-990415.

Valve plates: HS46-104189, HS46-104203, HS46-104503, HS46-104856, HS46-105186, HS54-105100, HS54-105101, HS54-105102, HS54-105103, HS54-105104, HS64-105095, HS64-105096, HS64-105097, HS64-105098, HS64-105099.

Bearing plates: HS64-103814, HS54-103852, HS46-104198.

Piston assemblies: HS64-103818, HS54-101077, HS46-104199.

Slipper retainers: HS64-103817, HS46-104211, HS54-103853.

Shafts: HS54-105050, HS54-105051, HS54-105054, HS54-105055, HS54-105064, HS54-105065, HS54-105068, HS54-105069.

The universal NSH100 angled flange is designed for connecting "Master" series gear pumps with a displacement of 100 cm³ and "Antey" series pumps with displacements of 71 and 100 cm³ to hydraulic systems, as well as other pumps of similar design with GOST mounting dimensions.

The universal NSH50 angled flange is designed for connecting "Master" series gear pumps with a displacement of 50 cm³ and "Antey" series pumps with a displacement of 50 cm³, as well as other pumps of similar design with GOST mounting standards.

The universal NSH32 angled flange is designed for connecting "Master" series gear pumps (3rd size group) with displacements of 25, 32, 40 cm³ and "Antey" series pumps with a displacement of 32 cm³, as well as other pumps of similar design with GOST mounting standards.

The universal NSH10 angled flange is designed for connecting "Master" series gear pumps (2nd size group) with displacements of 6, 10, 14, 16 cm³, as well as other pumps of similar design with GOST mounting standards.

Displacement range – 6 ... 25 cm³.
Gear flow dividers for hydraulic systems with a rated pressure of up to 250 bar.

An excellent solution for hydraulic systems where synchronized operation of hydraulic cylinders or hydraulic motors is required.

Group 3

Displacement – 32, 50 cm³
Rated pressure – up to 160 bar

Reliable gear hydraulic motors that are successfully operated in harsh climatic conditions and high-dust environments on tens of thousands of machines worldwide.

Group 2

Displacement: 6 ... 25 cm³/rev
Rated pressure: up to 250 bar

KVANT Series Group 2 gear motors GM2K6...GM2K25 are available with a wide range of drive shafts, mounting flanges and hydraulic port connections in accordance with SAE, DIN, European and German standards, allowing them to be used in a wide variety of applications.

The motors offer high reliability and long service life. They are well suited for driving the working elements of various machines and mechanisms, including fan drives, mower drives, pneumatic seeders and other equipment.

Right-hand, left-hand and reversible rotation versions are available.

Group 3

Displacement: 20 ... 71 cm³/rev
Rated pressure: up to 250 bar

KVANT Series Group 3 gear motors GM3K20...GM3K71 are available with a wide range of drive shafts, mounting flanges and hydraulic port connection options in accordance with commonly used international standards. The variety of configurations allows them to be used for driving the working elements of various machines and mechanisms.

Their simple and reliable design ensures stable operation and long service life.

Right-hand, left-hand and reversible rotation versions are available.

Group 2

Displacement: 4 ... 28 cm³/rev
Rated pressure: up to 250 bar

KVANT Series Group 2 gear pumps GP2K4...GP2K28 are available with a wide range of drive shafts, mounting flanges and port connection options in accordance with commonly used international standards. The variety of configurations ensures easy integration into different hydraulic systems.

Their robust design and wide range of configurations make them a versatile solution for agricultural, construction and municipal machinery, lifting and material-handling equipment, and other mobile machines.

KVANT Group 2 pumps are available in right-hand and left-hand rotation versions.

Group 2.5

Displacement: 16 ... 45 cm³/rev
Rated pressure: up to 250 bar

KVANT Series Group 2.5 gear pumps are available with a wide range of drive shafts, mounting flanges and port connection options in accordance with commonly used international standards. The variety of configurations ensures easy integration into different hydraulic systems and equipment.

Their robust design, high reliability and long service life make them a versatile solution for hydraulic systems of agricultural, construction and municipal machinery, lifting and material-handling equipment, and other mobile machines.

Group 3

Displacement: 20 ... 90 cm³/rev
Rated pressure: up to 250 bar

KVANT Series Group 3 gear pumps GP3K20...GP3K90 are available with a wide range of drive shafts, mounting flanges and port connection options in accordance with commonly used international standards, allowing them to be used in a wide variety of applications.

Their robust design, high reliability and long service life make them a versatile solution for hydraulic systems of agricultural, construction and municipal machinery, lifting and material-handling equipment, and other mobile machines.

KVANT Group 3 pumps are available in right-hand and left-hand rotation versions.

Group 4

Displacement: 63 ... 200 cm³/rev
Rated pressure: up to 220 bar

KVANT Series Group 4 gear pumps GP4K63...GP4K200 are available with a wide range of drive shafts, mounting flanges and port connection options in accordance with commonly used international standards, allowing them to be used in a wide variety of applications.

Their robust design, high reliability and long service life make them a versatile solution for hydraulic systems of agricultural, construction and municipal machinery, lifting and material-handling equipment, and other mobile machines.

KVANT Group 4 pumps are available in right-hand and left-hand rotation versions.

KVANT Series multiple-section gear pumps are designed for hydraulic systems with rated pressures up to 250 bar. They are available in Groups 1, 2, 2.5, 3 and 4, with displacements ranging from 1 to 200 cm³/rev.

The pumps combine versatility, a simple design and low maintenance requirements. A wide range of mounting and connection dimensions, available configurations and additional options allows them to be used in hydraulic systems of various types of mobile machinery and equipment.

KVANT Series multiple-section gear pumps are available in right-hand and left-hand rotation versions.

Group 2

Working volume — 6, 10, 14, 16 cm³/rev.
Nominal pressure — up to 160 bar.

Models: NSh6M-3, NSh10M-3, NSh14M-3, NSh16M-3. Also common abbreviations NSh6, NSh10, NSh14, NSh16. Available versions with right and left direction of rotation.

Designed for hydraulic systems of agricultural, construction, municipal and other mobile equipment. Overall and connecting dimensions comply with DSTU and GOST standards.

Special versions are available upon agreement with the customer.

Group 3

Displacement: 25, 32, 40, 50 cm³/rev
Rated pressure: up to 160 bar

Models: NSh25M-3, NSh32M-3, NSh40M-3 and NSh50M-3. Right-hand and left-hand rotation versions are available.

The pumps are designed for hydraulic systems of agricultural, construction, municipal and other mobile machinery. The overall and mounting dimensions comply with DSTU and GOST standards.

Special versions are available upon agreement with the customer.

According to the applicable technical specifications (TU), Hydrosila products are not classified as dual-use products.

Group 4

Displacement: 100 cm³/rev
Rated pressure: up to 160 bar

Models: NSh100M-3 and NSh100M-3L. Right-hand and left-hand rotation versions are available.

The pumps are designed for hydraulic systems of agricultural, construction, municipal and other mobile machinery. The overall and mounting dimensions comply with DSTU and GOST standards.

Special versions are available upon agreement with the customer.

According to the applicable technical specifications (TU), Hydrosila products are not classified as dual-use products.

Group 3

Displacement - 32 cm³
Nominal pressure - up to 190 bar.

Simple and reliable gear pumps, overall and connection dimensions comply with DSTU and GOST standards.

The upgraded MASTER series design now operates at pressures up to 190 bar and delivers high efficiency across the entire operating speed range.

Group 3

Displacement - 32 cm³, 50 cm³.
Nominal pressure - up to 200 bar.

Simple and reliable gear pumps developed based on the MASTER М-4 series.

Housing made of high-strength cast iron, overall and connection dimensions comply with DSTU and GOST standards. Custom solutions for special applications are available.

Group 3

Displacement: 32 cm³/rev, 50 cm³/rev
Rated pressure: up to 160 bar

Models: NSh32A-3, NSh50A-3, NSh32A-3L and NSh50A-3L. The abbreviated designations NSh32 and NSh50 are also commonly used. Right-hand and left-hand rotation versions are available.

Reliable ANTEY Series gear pumps have been successfully used for many years in demanding climatic conditions and high-dust environments worldwide. The overall and mounting dimensions comply with DSTU and GOST standards.

According to the applicable technical specifications (TU), Hydrosila products are not classified as dual-use products.

Group 4

Displacement: 71 cm³/rev, 100 cm³/rev
Rated pressure: up to 160 bar

Models: NSh71A-3, NSh100A-3, NSh71A-3L and NSh100A-3L. The abbreviated designations NSh71 and NSh100 are also commonly used. Right-hand and left-hand rotation versions are available.

Reliable ANTEY Series gear pumps have been successfully used for many years in demanding climatic conditions and high-dust environments worldwide. The overall and mounting dimensions comply with DSTU and GOST standards.

According to the applicable technical specifications (TU), Hydrosila products are not classified as dual-use products.

Group 5

Displacement: 250 cm³/rev
Rated pressure: up to 200 bar

Models: NSh250A-3 and NSh250A-3L. The abbreviated designation NSh250 is also commonly used. Right-hand and left-hand rotation versions are available.

Reliable ANTEY Series gear pumps have been successfully used for many years in demanding climatic conditions and high-dust environments worldwide. The overall and mounting dimensions comply with DSTU and GOST standards.

Group 2.5

Displacement: 16 ... 45 cm³/rev
Rated pressure: up to 250 bar

TITAN Series gear pumps feature an aluminium-alloy housing and are designed for hydraulic systems of mobile machinery mounted on truck chassis. The pumps are installed directly on the power take-off (PTO).

The overall and mounting dimensions comply with the ISO standard. Rear and side hydraulic port connections are available for easier installation.

The pumps are available in right-hand and left-hand rotation versions.

Group 3

Displacement: 34 ... 100 cm³/rev
Rated pressure: up to 280 bar

TITAN Series Group 3 gear pumps feature a high-strength cast-iron housing.

The pumps are mounted directly on the power take-off (PTO). Their overall and mounting dimensions comply with ISO and UNI standards.

Group 4

Displacement: 63 ... 150 cm³/rev
Rated pressure: up to 290 bar

TITAN Series Group 4 gear pumps GP4T63...GP4T150 are manufactured with a cast-iron housing.

The pumps are mounted directly on the power take-off (PTO), with overall and mounting dimensions complying with ISO standards. They are designed for hydraulic systems of mobile machinery mounted on truck chassis. Rear and side hydraulic line connections are available for easier installation. The pumps are available in right-hand and left-hand rotation versions.